Liquid Flux NC264-5 is an alcohol-based no-clean flux formulated to offer a very wide process window for lead-free and tin-lead wave soldering operations. NC264-5 offers faster wetting for SN100C® and SAC alloys than previously formulated fluxes and is compatible with a broad range of lead-free and tin-lead solder alloys. NC264-5 offers low post-process residues and has proven to reduce preventative maintenance requirements for spray fluxing applications. NC264-5 is designed to be a no-clean, non-visible residue flux, which can be cleaned if critical to the product application.
Features
* Broad Process Window
* Low Post Process Residues
* Fast Wetting for SN100C® and SAC alloys
* Lead-Free and Tin-Lead Compatible
* Halide Free
Application
Liquid Flux NC264-5 is formulated for application via spray, foam, brush, mist, or dip, For spraying, NC264-5 is ready to use directly from its container, no thinning required. When spray fluxing, it is imperative that proper flux coverage and uniformity be achieved and maintained. A dry flux coating of 500-1500 micrograms per square inch is recommended as a starting point. When nitrogen sealed wave solder equipment is used, it is generally necessary to apply slightly more flux than normal as a result of excess drying due to the extended lenght of equipment. When foaming, air stones should be supplied with compressed air, free of oil and moisture. Adjust foam head to acheive uniform bubble size for optimum coverage. During foaming applications, it is periodically necessary to add AIM’s Common Flux Thinner to replace that which is lost due through evaporation.
Process Control
Because of the low percentage of solids in this flux, control of specific gravity with automated equipment usually is found to be ineffective; therefore, control via titration is necessary. Titration should be carried out at least once every hour for flux foaming operations, or more often if large variances are found.
Cleaning
Liquid Flux NC264-5 can be cleaned, if necessary, with saponified water or an appropriate solvent cleaner.
Handling
Liquid Flux NC264-5 has an upopened shelf life of 1 year when stored at room temperature. Do not store near fire or flame. Keep away from sunlight as it may degrade the product. Liquid Flux NC264-5 is shipped ready-to-use, no mixing necessary. Do not mix any used and unused chemical in the same container. Reseal and opened containers
Safety
Use with adequate ventilation and proper personal protecive equipment. Refer to the accompanying Safety Data Sheet for any specific emergency information.Do not dispose of any hazardous material in non-approved containers
